Table of Contents
Advertisement
"Gateway Configuration" Screen - Field and Button Definitions
The Gateway Configuration screen allows for the discovery, addition and configuration of Gateways, Expanders and locks.
additionally, this screen serves as the main hub for all Networx devices and displays all pertinent status information.
Click the Gateway Config button to access the Gateway Configuration screen.
Gateways
Click to display the Gateway
menu selections.
Locks
Click to display the Locks
menu selections.
Expanders
Click to display the Expand-
ers menu selections.
Note:
The new simplified
menu selections are intended
to guide you to the proper
selection based on the device
you need to configure.
Description
Default name is "New Gate-
way".
Double-click to manually edit
the Gateway Description.
IP Address
Specifies
the
IP
address
currently
assigned
to
the
Gateway from the network.
This column is color coded;
see "Color Definitions" on the
next page.
Color Key
The IP Address column is color coded to
describe the status of the Gateway (see next
page for complete descriptions).
Blue = Ready
Green = Available
Red = Unreachable
12
Channel No.
Displays
the
internal
channel
number assigned to the Gateway.
MAC Address
A unique serial number assigned to the
Gateway that identifies that Gateway from
all others.
Inside the Gateway housing,
the MAC address is located on a square
sticker (look under the bar code) and has
12 digits, grouped in 6 pairs separated by
dashes.
Discover Gateways And Auto Add
This button combines two actions: The
"Discover New Gateway(s)" process
and the "Add Gateway To Account"
process, in one button.
The Gateways that are found on the
network (but not already configured) are
automatically added to the current
Account and listed below.
Firmware
Indicates the current firmware
version the Gateway is running.
Number of Locks to Discover
Click to set the number of locks
you wish to discover (1 - 63).
Discover Locks
Click to start the lock discovery
process.
transmitted based upon the
number of locks selected in
"Number of Locks to Discov-
er". Note: Only those locks
within range that have not al-
ready been assigned to a Gate-
way will respond.
Status
Displays the current state or the
last-known
Gateway.
Expanders
Indicates the total number of
Expanders added to the version
2 Gateway.
Assigned Locks
Indicates the total number of
locks assigned to the Gateway /
Expanders.
Close
Click to save changes and exit.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
The signal will be
condition
of
the
Hide quick links:
Advertisement
Table of Contents
