Alarm Lock Trilogy Networx AL-IME2-EXP Installation Instructions

345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
or visit us at
http://tech.napcosecurity.com/
(Note: Technical Service is for security professionals only)
Publicly traded on NASDAQ Symbol: NSSC
OVERVIEW
™
The Trilogy Networx
the coverage area of version 2 series Gateways, allowing
control of up to its rated maximum of 63 Networx locks per
Gateway. Installation is simple, as the Expander only re-
quires a connection to an AC outlet.
AL-IME2-EXP Expanders are cost-effective, easier to wire
than conventional Gateways, and feature a simplified 'Plug
and Play' setup where the Networx system automatically
identifies all newly powered Expanders and quickly deter-
mines the best wireless signal pathways. Up to 7 Expanders
can be added to one version 2 series Gateway.
Why use AL-IME2-EXP Expanders?
 Less costly, Expanders can be used in place of addition-
al Gateways
 Does not require network access / Ethernet cables
 Extends wireless lock signal coverage
 Reach otherwise troublesome locks in areas of insuffi-
cient signal strength
 Allows for easier (flexible) positioning of version 2 Gate-
ways
 Allows large area signal coverage with a single network
connection to the Gateway
Note: Expanders are available in two different designs,
the AL-IME2-EXP and the AL-IME2-PIE Plug-In Expander
(identical in operation, the compact AL-IME2-PIE plugs di-
rectly into a standard 120VAC un-switched/uninterruptable
wall outlet).
Version 2
The AL-IME2-EXP " version 2" Expanders (notice the " 2"
in the model name) are the next generation of Networx wire-
less devices. Because AL-IME2-EXP Expanders only
work with version 2 Gateways, a version 2 Gateway must be
installed and operational in your system for AL-IME2-EXP
Expanders to function (AL-IME2-EXP Expanders cannot
communicate with older "non-version 2" Gateways).
Note: Although the version 2 Gateways and AL-IME2-
EXP Expanders CAN be mixed into an existing system
that includes older "non-version 2" Gateways, at least one
new version 2 Gateway must be up and running before an
AL-IME2-EXP Expander can be used.
IMPORTANT: DL-Windows version 5.4.2 or later is re-
quired to support version 2 Gateways and Expanders.
The AL-IME2-EXP Expander is compatible with Alarm
Lock and Continental Access products. Refer to the docu-
mentation supplied with your software for integration details.
AL-IME2-EXP SPECIFICATIONS
NETWORK RANGE
Gateway/Expander to Locks: Clear field range 500'.
Typical indoor range: Networx 75-175'; ArchiTech Networx:
50-125'. Note: Actual range varies with building con-
struction.
© ALARM LOCK 2018
AL-IME2-EXP Expander extends
AL-IME2-EXP Expander

Installation Instructions

Gateway/Expander to Expander:
Typical indoor range, 75- 175'. Note: Actual range varies
with building construction.
AL RADIO LINK
900 MHz GFSK
50 Channels
10mW power output
- Provided by UL Listed Class 2 Transformer
POWER
Peak Supply Current: 150mA
Input Voltage: 5 - 6VAC
Includes one (1) 6VAC External Power Supply
ENVIRONMENTAL
Operating Temperature: -20˚ to 60˚C (-4˚ to 140˚F)
Storage Temperature: -40˚ to 85˚C (-40˚ to 185˚F)
PHYSICAL
Enclosure Size: 4.5"H x 6.0"W x 1.94"D
Weight: 0.5lbs.
EXPANDER LOCATION GUIDELINES
Once your version 2 Gateway location has been selected,
the next step is to determine where to mount the Expander.
However, the following must be taken into consideration:
 Generally, the Expanders should be within approximately
75 feet (radially) from the Gateway or another Expander
 Expanders should be located within 100 feet (radially) from
the intended wireless lock locations
 Open areas will increase range while concrete building
construction, walls, ceilings and narrow corridors will
decrease range
 ArchiTech series locks generally have shorter range to/
from an Expander
 Select a location that allows access to the power wires
running from the 6VAC power transformer (supplied)
 Expanders should be mounted in elevated areas; however
mounting in a drop ceiling can adversely affect signal
strength
 Preferred mounting position = 6 to 12" below ceiling
 Expanders must be mounted vertically; horizontal "flat"
mounting of the Expander should be specifically avoided
 Although wood and wallboard construction can have little
effect upon signal strength, concrete or brick can reduce
signal strength by up to 35%. Steel-reinforced concrete or
metal lath and plaster can reduce signal strength as much
as 90%!
 Do NOT mount close to electrical wiring or other metal
obstructions such as pipes or conduits
 Installing in computer closets or server rooms can nega-
tively impact signal strength
Helpful Tips
 The AL-NSM Networx Signal Meter and the AL-NSG
Networx Signal Generator can assist with identifying
WI2156BLF 1/18
Clear field range 500'.
1