Linking Lock Profiles - Alarm Lock ArchiTech Series User Manual

Dl-windows for networx v5

Table of Contents

After physical locks are successfully assigned to the Gateway / Expander, they must be "Linked" to Lock Profiles (locks not

Linked cannot be downloaded). In DL-Windows, the word "Link" is used to describe the specific action of associating a

Lock Profile to the physical lock assigned to the Gateway / Expander (by serial number). The Lock Type (model) of the

Lock Profile MUST match the assigned lock to which you wish to Link. The Link / Unlink Lock Profiles screen may be

accessed in one of two ways:

● More commonly, the screen is accessed immediately following lock assignment (click Yes to confirmation popup shown

on previous page);

● At a later time, from the DL-Windows "Main Screen", click Locks > Link / Unlink Lock Profiles.

Note: A condensed version of the screen may be accessed via the right-click options from the Lock Profile (right-click

the Lock Profile and select "Link / Unlink Lock Profile"). See page 51 for more information.

Available Lock Profiles

Displays all existing available Lock

Profiles in the current Account.

Linked Locks

Lists the physical locks currently

Linked to Lock Profiles.

LINKING PROCEDURE

To Link a Lock Profile to an assigned lock, in the Available Lock Profiles field, click to select a Lock Profile, then in the

Available Locks By Serial Number field, click the physical lock to which you want to Link.

automatically move down to the Linked Locks grid at the bottom. Note: Since Lock Types (models) must match for

successful Linking, when a Lock Profile is selected, the Available Locks By Serial Number field automatically filters and

displays only matching Lock Types.

If an incorrect Linking was made, or if you wish to undo a Linking, simply select the Linked lock from the Linked Locks grid

and click the Unlink Lock button (the Lock Profile and the available locks will return to their respective lists, and are

thereafter available for Linking.

CONGRATULATIONS! Your locks have been Linked, and are now able to be downloaded with Lock Profile data.

To add Users, Schedules, etc., see OI382.