Security Password - Alarm Lock ArchiTech Series User Manual

Overview
Before Gateways and locks can be discovered and
configured, a Security Password must be set for the
Account. The Security Password creates a secure
connection between DL-Windows, your Gateways and the
physical locks. Once set, the Security Password is
embedded within the radio transmissions, also preventing
separate Accounts from overlapping their wireless signals.
IMPORTANT:
The Security Password cannot be
changed and cannot be retrieved. If you wish to change
or remove the Security Password, the Account may be
cloned to remove the Security Password in the new
Account (see OI382 for more information about "cloning"
Accounts). To change or remove the Security Password in
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
S e c u r i t y P a s s w o r d
the locks and/or the Gateways, each lock (or Gateway)
must be manually defaulted and re-downloaded with the
new (or blank) Security Password.
To set the Security Password, click Tools > Set Security
Password. Note: After a Security Password has been
created, the Tools > Set Security Password will no
longer be available for the selected Account.
In the screen that appears (shown below), type a unique 6
character (no more, no less) password in the New
Password field. Retype the password in the Confirm
field and click OK to set the Security Password, or click
Cancel to exit without saving changes.
11