Contents and general instructions
Target group
The aim of this manual
VIII
This manual is aimed at technicians trained in control and
automation technology, fitters etc. who
are working for the first time with digital drive controllers
are already familiar with digital drive controllers, but who
are installing a digital drive controller like the SEC−AC for
the first time.
This manual will help you to carry out the first commissioning
of the SEC−AC successfully.
In this manual you will find important information and acquire
the basic knowledge neceesary for operating the SEC−AC cor
rectly.
Most work steps in this manual are divided into two parts:
Description part: here you will learn important instruc
tions and the aim of each individual work step.
Instruction part: here you carry out the work step.
In the left−hand margin you will find symbols which simplify
the orientation in this manual for you during commissioning.
As this manual is intended for the first commissioning of the
complete SEC−AC product family, the regulator for which the
work step is intended is always specified for each individual
work step.
Festo P.BE−SEC−AC−HW−EN en 0511c