About this document
1.2
Target group
This documentation is intended exclusively for technicians trained in control and automation tech-
nology who have experience in installation, commissioning, programming and diagnostics of posi-
tioning systems.
1.3
Version
This documentation refers to the following version of the motor controller:
– Firmware: V 1.4.x and above
– FCT plug-in: CMMO-ST V 1.4.x and above
The following details are displayed in the software with an active online connection:
• Firmware version and MAC-ID è "Info" register of the integrated web server.
• Hardware version, firmware version è FCT ("Controller" screen).
If an online connection is currently unavailable, information relating to the last connection will be
displayed.
Additional version details e.g. revision: è product labelling of the motor controller.
NOTICE
Before using a newer firmware version:
• Check whether a newer corresponding version of the FCT plug-in or user documentation is available
è www.festo.com/sp.
1.4
Additional information
– Contact the regional Festo contact if you have technical problems è www.festo.com.
– Accessories è www.festo.com/catalogue.
Festo — CMMO-ST-C5-1-LKP — 2022-05b
5