MICRO-EPSILON surfaceCONTROL 3D Instruction Manual page 86

Description of the "Evaluation" View
G "Start measurement" button: Click on this button to perform a measuring operation, calculate
the measurement results and display the point cloud and measurement results of the currently
selected measuring program in the 3D-View.
H Results display: The measurement results of the currently selected measuring program are dis-
played. Here, you can select which measured values are to be made available later for calcula-
tion, OK/nOK assessment, logging and output (see Chapter 3.16.8).
I Status bar: Status and error messages are displayed in the status bar (see Chapter 8.1).
1 Input data: Use this selection field to select the input data for the program (see also Chap. 3.16.3).
2 3D-View: The calculated center of gravity is displayed as an orange point in the 3D-View. The
points that were used to calculate the center of gravity (green) and the discarded points (gray) are
displayed.
Page 86