Startup Diagnostics Overview - Nortel CallPilot 1002rp Installation And Configuration Manual
Maintenance and diagnostics
Hide thumbs
Also See for CallPilot 1002rp:
- Maintenance and diagnostics (218 pages) ,
- Hardware installation manual (86 pages) ,
- User manual (156 pages)
Table of Contents
Advertisement
Troubleshooting your CallPilot system
Startup diagnostics overview
Introduction
This section contains procedures for interpreting the startup diagnostics on
the 1002rp server.
Types of startup diagnostic
The following types of startup diagnostics are available on the server:
Basic hardware check (LEDs, and so on)
Power-On Self-Test (POST) diagnostics
SCSI controller diagnostics or RAID controller diagnostics
These diagnostics are available at initial system startup, or after any 1002rp
server reset.
22
Standard 1.0
CallPilot
Advertisement
Table of Contents
Troubleshooting
