Nortel CallPilot 1002rp Installation And Configuration Manual page 155

October 2002
3 Hold cables away from the drive bay as you pull the media drive carrier
away from the chassis until the connectors attached behind the
components can be reached.
.
4 Label and disconnect cables from installed media drives, and then free
the carrier from the chassis.
What's next?
Continue with one of the following:
"Replacing a tape, CD-ROM, or floppy drive" on page 156
"Installing a tape drive" on page 159
Part 5: 1002rp Server Maintenance and Diagnostics
Replacing a hard drive, tape drive, CD-ROM drive, or floppy drive
CAUTION
Risk of equipment damage
To avoid damaging cables during this procedure, ensure
that no cables are crossed when moving the media drive
carrier in and out of the drive bay.
155