Nortel CallPilot 1002rp Installation And Configuration Manual page 191

October 2002
12 Restart the server, and then log on to Windows NT.
13 Run the Configuration Wizard to detect the new hardware.
Note: If you have increased the channel capacity or changed the number
of different multimedia channels, add the new DNs or update the media
allocation as required, or both.
Result: The MPB16-4 board installation is complete.
14 Test the multimedia channels to ensure the new MPB16-4 board is
functioning properly.
Refer to "Testing the CallPilot installation" in Part 3 of the CallPilot
Installation and Configuration binder.
Part 5: 1002rp Server Maintenance and Diagnostics
Replacing or adding voice processing boards
191