Nortel CallPilot 1002rp Installation And Configuration Manual page 18

About this guide
To replace or install
memory modules, the CPU or
BIOS
Approved replacement parts
Before replacing any parts on your server, refer to the Nortel Networks
product catalog for the part codes.
.
Preparing for maintenance activities
Before you proceed with hardware maintenance activities, review Part 1 of
the CallPilot Installation and Configuration binder for the following
information:
required tools and equipment
recommended safety precautions for electrostatic discharge, handling
cards, and handling your server
instructions for shutting down your 1002rp server or for taking it out of
service
18
CAUTION
Risk of system damage
The use of parts that are not approved by Nortel Networks can
cause serious system problems or void your Nortel Networks
warranty.
See
Chapter 12, "Maintaining the Pentium
III SBC card" on page 195
Standard 1.0
CallPilot