Nortel CallPilot 1002rp Installation And Configuration Manual page 52

Using Windows NT online diagnostic tools
3 Press Enter.
Result: The system runs the nbtstat utility.
4 Type Exit to exit MS-DOS and return to Windows NT 4.0.
The netstat command
The netstat command displays current TCP/IP network connections and
protocol statistics.
Netstat command syntax
The netstat command uses the following syntax:
netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]
Parameter
-a
-e
-n
-s
-p proto
-r
interval
52
Description
Displays all connections and listening ports.
Displays Ethernet statistics. This can be combined with the
-s option.
Displays addresses and port numbers in numerical form.
Displays per-protocol statistics.
Shows connections for the protocol specified by proto.
Proto can be tcp or udp. If used with the -s option, proto can
be tcp, udp, or ip.
Displays the contents of the routing table.
Redisplays selected statistics, pausing between each
display. Press Ctrl+C to stop redisplaying.
Standard 1.0
CallPilot