Viewing The Last Diagnostic Results - Nortel CallPilot 1002rp Installation And Configuration Manual

Using CallPilot Manager to monitor hardware

Viewing the last diagnostic results

Introduction
You can review the results of previously-run diagnostics by clicking the Get
Last Results button for a component.
To view the last diagnostics result
ATTENTION
1 In CallPilot Manager, click Maintenance
Result: The Maintenance page appears.
2 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
3 Continue clicking the plus sign (+) until the component with which you
want to work is visible.
4 Click the hardware component for which you want to run diagnostics.
Result: The Maintenance page refreshes to show details about the
component.
100
Nortel Networks recommends that you courtesy stop rather
than stop a component if possible. For instructions, see
"Starting and stopping components" on page 91.
➝
Maintenance Admin.
Standard 1.0
CallPilot