Nortel CallPilot 1002rp Installation And Configuration Manual page 154

Replacing a hard drive, tape drive, CD-ROM drive, or floppy drive
To remove the media drive carrier from the chassis
.
.
1 Remove the front bezel from the chassis. See "Removing the front bezel
and server cover" on page 122.
2 Locate the media drive carrier, and loosen the four Phillips-head screws
and washers securing the carrier to the drive bay, as shown in the
diagram below:
154
DANGER
Risk of electrocution
High current inside the chassis can cause severe injury.
CAUTION
Risk of equipment damage
Electrostatic discharge due to improper handling can cause
components to be damaged or rendered unusable.
Standard 1.0
G100747
CallPilot