Nortel CallPilot 1002rp Installation And Configuration Manual page 78

Using CallPilot Manager to monitor hardware
To investigate using the Event Browser
1 In CallPilot Manager, click System
Result: The Event Browser page appears.
2 Click an event that appears to be related to the problem, or an event that
occurred near the time the alarm was raised.
Result: A description of the event appears in a new web browser
window.
3 View the description and recovery action.
4 Repeat steps 2 and 3 for a few more events, if necessary.
5 If the solution to the problem is not apparent, contact your Nortel
Networks technical support representative.
78
➝
Event Browser.
Standard 1.0
CallPilot