Microscan VS-1 Getting Started page 63

–
Highlight Top Fast Edge in the Step Tree (left pane). Adjust the
21.
following Top Fast Edge properties:
–
–
–
Highlight Right Fast Edge in the Step Tree (left pane). Adjust the
22.
following Right Fast Edge properties:
–
–
–
Highlight Snapshot in the Step Tree (left pane). Right click Snapshot
23.
and click Insert Into. FrontRunner™ displays the Insert Step window.
Click the Measurements tab. Double click on IntersectLines Meas to
insert it into the Snapshot.
Highlight Snapshot in the Step Tree (left pane). Right click Snapshot
24.
and click Insert Into. FrontRunner™ displays the Insert Step window.
Double click on IntersectLines Meas to insert a second one into the
Snapshot.
Rename the two IntersectLines Meas tools:
25.
a.
b.
Highlight Snapshot in the Step Tree (left pane). Right click Snapshot
26.
and click Insert Into. FrontRunner™ displays the Insert Step window.
Click the Analysis Tools tab. Double click on TwoPt Locator to insert it
into the Snapshot.
v4.1.0, February 2010
Sharpness — Set to Sharp
Scan Direction — Set to Top to Bottom
Transition color — Set to Dark to Light
Sharpness — Set to Sharp
Scan Direction — Set to Right to Left
Transition color — Set to Dark to Light
Sharpness — Set to Sharp
Highlight the first IntersectLines Meas, right click, and then click
Rename. Rename the first IntersectLines Meas to Left Top
IntersectLines Meas.
Highlight the second IntersectLines Meas, right click, and then
click Rename. Rename the second IntersectLines Meas to Right
Top IntersectLines Meas.
Getting Started with the VS-1 Smart Camera
Advanced Example Using Multiple Tools
3
3-7