Chapter 6 Video Recording And Picture Capture; Storage Settings; Set Memory Card; Set Nas - HIKVISION DS-2TD2637T-7/P User Manual

Thermal Optical Bi-spectrum Network Camera User Manual

Chapter 6 Video Recording and Picture Capture

This part introduces the operations of capturing video clips and snapshots, playback, and
downloading captured files.

6.1 Storage Settings

This part introduces the configuration of several common storage paths.

6.1.1 Set Memory Card

If you choose to store the files to memory card, make sure you insert and format the memory card
in advance.
Before You Start
Insert the memory card to the camera. For detailed installation, refer to Quick Start Guide of the
camera.
Steps
1. Go to storage management setting page: Configuration → Storage → Storage Management →
HDD Management .
2. Select the memory card, and click Format to start initializing the memory card.
The Status of memory card turns to Normal from Uninitialized, which means the memory card
can be used normally.
3. Optional: Define the Quota of the memory card. Input the quota percentage for different
contents according to your need.
4. Optional: Check to enable POS Information Storage, then the device will record the POS
information of reflect light filter and forklift filter.
Note
The function is supported when your memory card capacity is 32 GB or above. Formatting the
memory card manually is required to reserve 16 GB for POS information.
5. Click Save.

6.1.2 Set NAS

Take network server as network disk to store the record files, captured images, etc.
Before You Start
Get the IP address of the network disk first.
37