Chapter 5 Intelligent Analysis; Switch The Scene Mode; Set Vca Parameters - HIKVISION DS-2TD4668-35A4/W User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Intelligent Analysis is used to detect whether there is any target breaks the VCA rules. The system
will send alarms when the VCA rule is triggered.
Note
This function is only supported in the thermal channel. Please take the actual product for
reference.

5.1 Switch the Scene Mode

The device provides different scene modes catering to various needs.
Go to Configuration → VCA → Basic Settings → Scene Mode to select a scene mode, and follow
the prompt to switch Scene Mode. Click Save.
Note
The individual configuration for each scene mode will not change after switching.
Basic
In this mode, the device is commonly placed at a specific location, and detects targets in the
user-configurable area.
Panorama View
In this mode, the device can detect targets in a changing scene when the device is in motion.

5.2 Set VCA Parameters

Steps
1. Go to Configuration → Local .
Rules
Enable it to display rules information on live view.
Display Rules Info. on Capture
Select Yes to display rules information on the capture.
2. Go to Configuration → VCA → Basic Settings to configure VCA parameters for the channel..
Intelligent Analysis
Check to enable intelligent analysis function.
Display VCA Info. on Stream

Chapter 5 Intelligent Analysis

19