Set Roi; Display Settings; Image Adjustment (Thermal Channel) - HIKVISION DS-2TD2137-4/P User Manual

Thermal network camera
Table of Contents

Advertisement

3. Click
and select
4. Click
, disable the two-way audio function.

9.1.12 Set ROI

ROI (Region of Interest) encoding helps to assigns more encoding resource to the region of interest,
thus to increase the quality of the ROI whereas the background information is less focused.
Before You Start
Please check the video coding type. ROI is supported when the video coding type is H.264 or
H.265.
Steps
1. Go to Configuration → Video/Audio → ROI.
2. Check Enable.
3. Select Stream Type.
4. Select Region No. in Fixed Region to draw ROI region.
1) Click Drawing.
2) Click and drag the mouse on the view screen to draw the fixed region.
3) Click Stop Drawing.
Note
Select the fixed region that needs to be adjusted and drag the mouse to adjust its position.
5. Input the Region Name and ROI Level.
6. Click Save.
Note
The higher the ROI level is, the clearer the image of the detected region is.
7. Optional: Select other region No. and repeat the above steps if you need to draw multiple fixed
regions.

9.2 Display Settings

It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings.
Click Default to restore settings.
9.2.1 Image Adjustment
You can optimize the image display effect of thermal channel by manual correction.
Manual Correction
Thermal Network Camera User Manual
, move the slider to adjust the volume.
41

Advertisement

Table of Contents
loading

Table of Contents