11.20
Removing the seat
–
Position the foot brake cylinder.
3
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K01148-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
K00864-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw more
easily.
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the rear.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the new cable ties.
S04538-11
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw
S04544-10
SERVICE WORK ON THE CHASSIS 11
engages in the foot brake cylinder.
4
.
M6
10 Nm (7.4 lbf ft)
5
.
M14x1.5
60 Nm (44.3 lbf ft)
B
.
6
.
M10
60 Nm (44.3 lbf ft)
7
with the washers.
M5
3 Nm (2.2 lbf ft)
.
Loctite
®
2701™
p. 42)
53