11.22
Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
11.23
Mounting the seat
–
Attach the frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the new cable ties.
A00886-11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw
A00781-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushing of the fuel tank,
lower the seat at the rear, and push the seat forward.
H02218-11
SERVICE WORK ON THE CHASSIS 11
C
and position it.
8
with the washers.
M5
3 Nm (2.2 lbf ft)
.
p. 92)
p. 49)
65