Removing The Seat - GAS GAS MC 250F 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20
56

Removing the seat

Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
A00818-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the screw
more easily.
–
Attach the frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount the new cable ties.
A00809-11
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw
A00781-10
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
M10 60 Nm (44.3 lbf ft)
C
and position it.
8
with the washers.
M5 3 Nm (2.2 lbf ft)
p. 82)
p. 44)
.
Loctite ® 2701™