Installing The Shock Absorber; Removing The Seat; Mounting The Seat - GAS GAS MC 85 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.19
11.20
11.21
52

Installing the shock absorber

S04337-11

Removing the seat

S04338-10

Mounting the seat

S04339-10
S04338-10
Main work
–
1
Push splash protector to the side and position the shock
absorber. Mount and tighten screw
Guideline
Screw, top shock M12
absorber
–
3
Mount and tighten screw
Guideline
Screw, bottom M12
shock absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel tank,
lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
1
Mount and tighten screw
Guideline
Remaining screws,
chassis
2
.
60 Nm (44.3 lbf ft)
Loctite
.
60 Nm (44.3 lbf ft)
Loctite
p. 41)
of the seat fixing.
M6 10 Nm (7.4 lbf ft)
® 2701™
® 2701™