11.9
Removing the seat
11.10
Mounting the seat
11.11
Removing the tool set
–
1
Pull on loop
–
Pull the seat back and lift it off.
W00174-10
–
Hook the seat using holding lugs
seat at the rear and push it forward.
–
Push locking pin
seat down until the locking pin locks in place with an audible click.
–
Check that the seat is correctly mounted.
V02715-10
Preparatory work
–
Remove the seat. (
Main work
–
Take the hexagon socket wrench for loosening and mounting
1
screws
from bracket
–
Remove screws
–
Take off the left side cover.
V02730-10
SERVICE WORK ON THE CHASSIS 11
and raise the rear of the seat.
1
on to bushings
3
4
into lock housing
and push the back of the
p. 53)
A
on the underside of the seat.
1
.
2
, lower the
53