Removing The Seat - GAS GAS MC 250F FACTORY EDITION 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.24
60

Removing the seat

Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
–
Allow the voltage regulator to cool down before performing any work.
W00197-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F03704-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the screw
more easily.
Finishing work
–
Check the free travel of the foot brake lever. (
–
Install the main silencer. (
–
Install the right side panel. (
–
Install the frame protector. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
1
Remove screw
6
.
M16x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
M10 60 Nm (44.3 lbf ft)
p. 86)
p. 67)
p. 62)
p. 50)
p. 47)
p. 62)
.
Loctite ® 2701™