Others (5-2) Status Indicator Light (Sl-9100) - Kyocera TASKalfa Pro 15000c Installation Manual

Enhancement device setup procedure > Optional device installation

(5-2) Others (5-2) Status Indicator Light (SL-9100)

This is a procedure of setting up Status Indicator with pole and bracket.
IMPORTANT
• All tapes and packing materials on the accessories parts have to be removed.
• Main power switch has to be turned off and power cable has to be unplugged before install SL-9100.
1
Adjust sound volume.
NOTE
Default setting is high volume, H (80dB).
In case if not to change the volume to low, L (70dB), then start from step2.
The sound can be OFF in System menu on operation panel.
1
Separate SL-9100 by rotating it.
2
Switch from [H] to [L].
3
Reassemble.
2
Insert pole ring [A] to bracket [B].
[A]
[B]
3-225
[CONFIDENTIAL]