Kyocera TASKalfa Pro 15000c Installation Manual page 304

Enhancement device setup procedure > Optional device installation
3
Put USB cable [C] through to the pole [D]. Put USB cable through to the pole bracket
[B]. Put the pole into the bracket matching the position showed in [E] and secure with
2 screws [A].
4
Hook up USB cable [B] and the body unit [A] and secure with the plastic band [C]. Cut
off extra part of the band [C].
[A]
IMPORTANT
Tighten at thinner part [D] of USB cable [B] with band [C].
[B] [D]
[C]
[A]
[A]
[B]
[D]
[B]
[B]
[A]
[B]
[E]
[D]
[A]
[C]
[B]
3-226
[CONFIDENTIAL]
[C]
[C]