Kyocera TASKalfa Pro 15000c Installation Manual page 71

The main unit setup procedure > Adjustment
U469 Color registration adjustment
1
Set A4/Letter paper.
2
Select [Color Regist] > [Manual] in U469 Adj Cor Reg.
3
Select [Print] and press [Start] key.
Color registration chart is output.
NOTE
In case if Yellow color is not visible on the chart, copy the chart by the following procedure.
[Color/Image quality] > [Hue Adjust] > select [Individual] > select [Yellow] of Hue circle and shift to "Red" side 3
times and then press [OK] to make copy.
[Yellow] section becomes [Green] so that judge with that condition.
Distinguish the line formed by [Cyan] color within [Green] color ([Green] color is formed the image by
overlapping [Yellow] ink and [Cyan] ink).
In this case, the color registration of [Cyan] should be adjusted beforehand that [Cyan] should be no color
registration.
Or, using the UV light (Black light) sold commercially available in the market which makes easier to view Yellow.
4
Select [Regist (CH)], [Regist (MH)] and [Regist (YH)] and check values for *H-1 to 7
and *V-3.
5
Pressing each item cursors to change the setting value.
Regist(YH)
YH
01
YV
02
6
Press [Start] key to set the setting value.
Thus, setting value come to "0".
Regist(MH)
Regist(CH)
MH
01
CH
01
MV
02
CV
02
2-55
MH-1
U469
I G E C A 1 3 5 7 9
H F D B 0 2 4 6 8
B
3
MV-3
I
H
G
F
E
D
C
B
A
0
1
2
3
4
5
6
7
8
[CONFIDENTIAL]