Kyocera TASKalfa Pro 15000c Installation Manual page 59
Hide thumbs
Also See for TASKalfa Pro 15000c:
- Operation manual (576 pages) ,
- Advanced operation manual (177 pages)
Table of Contents
Advertisement
The main unit setup procedure > Ink initial supply (Set up flow)
20
Set the maximum sized paper such as over A3/Ledger paper.
21
Select [Check] in U744 <Head cleaning> and the test chart is output automatically.
22
Place the test chart on scan table and scan it.
(The number of clogged nozzle come up by scanning the chart.)
23
If the discharged area is observed, perform manual print head cleaning U744
[Cleaning] to the color that has discharged area.
•
Perform the strong purge (cleaning) only for the color that has discharged area.
24
Output the test chart by selecting [Check] and scan it to check the print head
condition.
25
If it gets less clogged nozzle, repeat the step 23 to 24 with following order.
1
Perform the strong purge. (cleaning) only for the color that has discharged area.
2
Perform the extra strong purge. (cleaning) only for the color that has discharged area.
3
Perform the extra strong purge. (cleaning) only for the color that has discharged area.
4
Perform the extra strong purge. (cleaning) only for the color that has discharged area.
Ink ejection confirmation chart
When ink non-ejection has occurred
2-43
[CONFIDENTIAL]
Hide quick links:
Advertisement
Table of Contents
