Kyocera TASKalfa Pro 15000c Installation Manual page 398

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
9
Press [Start] key.
10
Select [Regist].
11
Change the setting value by using [+] [-] keys or the numeric keys.
12
Press [Start] key to set the setting value.
13
Select [Print] and press [Start] key to output check chart.
Adjust V value below 0.5 and H value to 0.
14
Select [Side Pos Adj] next.
15
Set A4/LTR in reduction on upper cassette 1.
16
Select [Print] key to output adjustment chart.
17
Place back the printed chart in cassette and print on back side.
18
Press [Start] key.
19
Find the leftmost point on scale line that cross with horizontal line and read value by
scale line as V value.
20
Find the closest position of line on face and back on the chart as H value.
6-68
[CONFIDENTIAL]