Kyocera TASKalfa Pro 15000c Installation Manual page 207

Enhancement device setup procedure > Optional device installation
6
Put back the connector cover [A] that removed in step 1 (Screw x1). Screw was
removed in step 1.
[B]
Preparation for Inverter and Decurler Unit (DE-9100)
7
Remove bracket of DE-9100.
1
Open front right cover [A]. Remove the bracket [B] (Screw x4). Brackets [B] and screws will not be used in this
installation again.
[A]
[A]
3-129
[CONFIDENTIAL]
[B]