Kyocera TASKalfa Pro 15000c Installation Manual page 371

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
IMPORTANT
When attaching the side registration guide [A], be careful of the positioning hole [B] and screw position [C].
The mounting angle of the side registration guide [A] changes.
[B]
In case of installing it in wrong position, Right Exit Tray Full Sensor will make mis-detection.
32
Attach the exit tray [A] to the main unit hooking up two (front and rear) hooks [B] of
the exit tray [A].
33
Open the front left lower cover [B] and insert the ink container [A] to the main unit
until click sound
(From upper position: Yellow/Black/Cyan/Magenta)
[A]
[C]
OK
[B]
[B]
[A]
CLICK!
6-41
[CONFIDENTIAL]
[A]
[C]
NG