Kyocera TASKalfa Pro 15000c Installation Manual page 380

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
62
(Display: Auto 0300) Supply ink and cleaning liquid to sub tank.
• Select [Execute] and press [Start] to run job.
63
(Display: Manu 0301) Close all clamps [A] of Y, K, C, M, CL in ink unit.
• Select [Execute] after completing the steps, then press [Start] key to continue.
64
(Display: Manu 302) Remove bracket rear cover [A]. (Screw x2)
Remove all paraffin tapes and pushdown 10 couplings [B] and connect to the main
unit.
• Select [Execute] after completing the steps, then press [Start] key to continue.
65
(Display: Auto 0303) Run ink and cleaning liquid circulation.
• Select [Execute] and press [Start] to run job.
• If error code is displayed, check the list and perform necessary action. (See
Then select [execute] and press [start] to return step 70.
6-50
[CONFIDENTIAL]
page 5-15)