Kyocera TASKalfa Pro 15000c Installation Manual page 32

The main unit setup procedure > Remove the transportation spacers
4
Push the cap unit [A] downward and pull it out slightly.
5
Remove the screw from the lower side of the cap front plate [A] with the screwdriver
then remove the plate. (Screw x1)
(The screw has a tag [B])
6
Remove the screw from the lower side of the cap rear plate [A] with the screwdriver
then remove the plate. (Screw x1)
(The screw has a tag [B])
[A]
[A]
2-16
[CONFIDENTIAL]
[B]
[B]