Kyocera TASKalfa Pro 15000c Installation Manual page 375

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
45
Remove the screws with the stubby driver (Total length 95mm or less) to release the
treatment unit [A]. (Screw x5)
IMPORTANT
If forgetting to remove the screw on the bottom, the wipe unit can not be moved, resulting in an error (C2000).
C2000: Treatment lift motor error.
(After removing the fixing screw, it will recover by turning on the power switch.)
46
Place the position of the treatment unit [A] back to the left side.
47
Reattach the upper left cover [A] to the original position. (Screw x11)
[A]
6-45
[A]
[A]
[CONFIDENTIAL]