Kyocera TASKalfa Pro 15000c Installation Manual page 20

The main unit setup procedure >
[Set up time as reference]: Except enhancement set up
The time showed below includes the ink installation time of 60 min.
Quality priority mode: within 160 min
Print priority mode: within 100 min
CAUTION
In case of moving the main unit, make sure that the waste ink and the cleaning liquid tank are removed and no
ink in the waste ink tray of the treatment unit. (see
And do not make the main unit vibrate and not hold up one side more than 80 mm in order to avoid from ink
leaking.
List of jig, tool and consumable material for set up and scheduled maintenance.
Group
Jig/Tool Stubby driver
Jig/Tool Wrench (M10: 17 mm/M12: 19 mm) Height/Level adjustment
Jig/Tool Dishpan
Jig/Tool Hex socket driver (5 mm)
Jig/Tool Jig for removing wipe unit
Jig/Tool Slope
Consumable Alfa wipe TX-1000 Series
Consumable Kim towel white or BEMCOT or
Wypall 60X/70X
Consumable Designated deionized water
Other stuffs Rubber gloves (powder free)
Consumable Trash bag
stuffs
Consumable Plastic sheeting
Consumable Paper (Standard)
Consumable Paraffin film
Consumable 7BG050022H GREASE FLOIL G-
301KB 50G
Consumable 7BG050023H GREASE FLOIL
KDG-67 50G
Consumable 60170001 SCANNER RAIL
GREASE(PG671)
Bolt head size of height adjustment for each units
AK-9110 / AK-9120 / DE-9100 / DF-9100
Main unit / ST-9100 / PF-9100
page
Parts
Remove protecting caps for shipping (Total length 95mm or less)
Used to contain water during cleaning of ink from parts
Color skew adjustment
Holder for the wipe unit (302TJ4154*) and Tray (302TJ4155*)
For taking main unit or enhancement down from palette.
(302TJ94E5* PARTS SLOPE SET UP SP)
Clean ink around ink tube coupler
At setting cleaning liquid tank (in case of getting wet)
Deionized water PR#9435A, R-950-32 or the water certify by Kyocera
Clean image conveying belt
For handling cleaning liquid tank
For discard trash
Protect floor from ink
For image quality check ((LTR/A4/A3/LGR/13x19.2")
Prevent ink leaking from coupling part
Parafilm Moisture Proof Sealing Film
For gear of CISREG: For plastic blue 50g (Blue color fade to yellow)
For gear for lifting motor in treatment unit: For metal yellow 50g
For noise from ISU or scanning failure
Unit name
2-4
6-1)
Remark
17 (M10)
19 (M12)
[CONFIDENTIAL]
Bolt head size