Store The Protective Caps For Shipping - Kyocera TASKalfa Pro 15000c Installation Manual

The main unit setup procedure > Installation

(9-1) Store the protective caps for shipping

IMPORTANT
Wear rubber gloves in handling. (If the liquid get your hands, rinse it immediately with water.)
Cleaning the protective caps for shipping
1
Fold the Alpha wiper [A] and drop a little deionized water [B] (2ml) on it.
[A]
2
Wipe 12 caps (silicon sheet) [A] with the Alpha wiper [B].
• Wipe them in the same direction until the ink is removed.
• Pay attention that the Alpha wiper does not touch on the frame edge.
• And do not let the Teflon sheet or the sponge on the cap deform.
3
Wipe deionized water on the cap with dried part of the Alpha wiper and check if no
dirt on the caps.
How to fold
[B]
2-35
[B]
[CONFIDENTIAL]
[A]