Kyocera TASKalfa Pro 15000c Installation Manual page 121

Enhancement device setup procedure > Optional device installation
12
Open the front cover [A] and remove plate [B] (Screw x3). The plate [B] and the
screws will not be used in this installation.
13
Close the front cover.
14
Attach stay lock upper [A] (Screw x4: M4x12).
15
Peel off the release paper [B] on sponge [A] and put in on dashed line [C].
[A]
[A]
[A]
0 to 5mm
[B]
[A]
3-43
[CONFIDENTIAL]
[B]
0 to 5mm
[C]