Kyocera TASKalfa Pro 15000c Installation Manual page 279

Enhancement device setup procedure > Optional device installation
10
Let projection [B] in front of exit tray unit [A] go through the hole [D] in tray unit fixing
parts [C]. Insert the positioning pins [F] on the exit tray unit fixing parts rear to the
holes in folding unit [G]. Secure the exit tray fixing parts rear [E] (Screw x4: M3x8).
[F]
[G]
11
Secure the ground line [B] to a frame of folding unit [A] (Screw x1: M3x8). Connect
connector [C] to connector [D] in folding unit [A].
[B]
[A]
[D]
[E]
[A]
[C]
3-201
[B]
[C]
[D]
[CONFIDENTIAL]
[E]
[F]
[B]
[C]