Kyocera TASKalfa Pro 15000c Installation Manual page 202

Enhancement device setup procedure > Optional device installation
37
Get 2 projections [B] into holes [C] of the foot cover rear [A]. Put back the foot cover
rear to the original position (Screw x3). Screw was removed in step 32.
[A]
38
Get 2 projections [B] into holes [C] of the foot cover front [A]. Put back the foot cover
front [A] to original position (Screw x2). Screw was removed in step31 .
[A]
[C]
3-124
[CONFIDENTIAL]
[C]
[B]
[A]
[B]