Kyocera TASKalfa Pro 15000c Installation Manual page 210

Enhancement device setup procedure > Optional device installation
11
Check height and level of main unit and DE-9100.
1
Check the height.
Check if panel line (black and white) align DE-9100 and main unit. If the border of black and white, then insert
pin [B] on connection plate [A] into hole [C] of DE-9100 and connect DE-9100 to main unit. Check the position
of pin [B] diameter [D] and hole [C] height [E].
• OK: Outline [D] of pin [B] is in between hole [C] height [E].
• NG: Outline [D] of pin [B] is out of hole [C] height [D].
DE-9100
[C]
[B]
[C]
OK
[B]
[E] [D]
[C]
NOTE
• Height adjustment is required when the border is not aligned.
NG
[E]
[D]
Main Unit
[A]
[E]
b
[B]
NG
[D]
[E]
3-132
[CONFIDENTIAL]
[D]