Loading Paper - Kyocera TASKalfa Pro 15000c Installation Manual

The main unit setup procedure > Installation

(6) Loading paper

When open a new package of paper, fan the sheets to separate them slightly prior to loading in the following
steps.
1
Bend the whole bundled sheets to swell them in the middle.
2
Hold the stack at both ends and stretch it while keeping the entire stack swelled.
3
Raise the right and left hands alternately to create a gap and feed the air between
papers.
4
Finally, align the papers on a level, flat table.
IMPORTANT
If paper is curled or folded, straighten it before loading. Paper that is curled or folded may
cause a jam.
2-28
[CONFIDENTIAL]