Cart Tray Replacement Procedure - GE Venue Go Service Manual

P R E L I M I N A R Y
D 5813707-100, R
IRECTION
8-2-20

Cart Tray Replacement Procedure

8-2-20-1 Tools
Phillips screwdriver of appropriate size
FRU Part #
Refer to
8-2-20-2 Time Required
5 min
8-2-20-3 Preparations
1.) Shut down the Venue Go™ ultrasound unit, as described in
2.) Prepare stable flat surface covered with a soft material (such as foam) to prevent scratches to the
display.
3.) Dismount Venue Go™ system from cart and place it on a previously prepared surface with the
display facing down.
8-2-20-4 Cart Tray Removal Procedure
4.) Dismount the system from the cart.
•
5.) Remove the cradle assembly.
•
6.) Remove the tilt assembly.
•
7.) Remove the cart bin.
•
8.) Remove the printer assembly.
•
8-50
2
EVISION
Table 9-16 .
on page 9-17
Dismounting System on Cart
Cradle Assembly Removal Procedure
Cradle Tilt Removal Procedure
Cart Bin Removal Procedure
Printer Assembly Removal Procedure
Chapter 8 - Replacement Procedures
V ™ S
ENUE ERVICE
Power Shutdown .
M
ANUAL