Download Print this page

General Safety Instructions - Bosch T40211 Original Instructions Manual

Support

Advertisement

en | 8 | T40211

2 General Safety Instructions

WARNING
Read and follow all safety notes and instructions!
Failure to follow the safety instructions may result in
serious injuries and material damages.
Observe and follow the safety notes below.
The load holding device has been specifically
constructed for its intended use. The safety of the
load holding device can no longer be ensured if it is
misused or modified in ways not expressly approved
by the manufacturer. Serious injuries or damage to
property can occur.
Ensure that each person using the load holding
device is familiar with these instructions and can
access them at all times.
Ensure that all users are also familiar with the
operating manuals of all tools and workshop
equipment, which are necessary for the work.
Carefully read and adhere to the instructions in the
technical safety information of the Volkswagen
Group brands.
Wear protective gloves in order to avoid cuts.
Wear safety shoes (according to ISO 20345, S2).
Position hands and feet carefully to avoid potential
crushing hazards.
Use the load holding device only for work approved
by the Volkswagen Group.
Use the load holding device only with the
accessories approved by the Volkswagen Group.
Do not exceed the maximum load capacity of
110 kg.
2018-05-02
Only use the support for work in accordance with
the workshop manuals of the Volkswagen Group
brands.
Only drive the load with the engine and gearbox
support VAS 6095/VAS 6095A or the workshop crane
on the lowest position.
Ensure that the track for the engine and gearbox
support VAS 6095/VAS 6095A or the workshop crane
is free and clearly visible.
Move the load slowly and carefully.
Observe the support and the load during all
movements.
The positioning of persons under the load and in the
dangerous area is prohibited during the movement
process.
The engine and gearbox support
VAS 6095/VAS 6095A shall only be operated by one
person alone.
Check the secure anchoring of the clamping block
VW313 prior to use.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany

Advertisement

loading