Allocation Of Physical Outputs - gefran GPC Configuration And Programming Manual

3.19.5.

Allocation of physical outputs

Address
Format
Single- Multi-
node node
1631 607 16 bit
1632 608 16 bit
1633 609 16 bit
1635 611 16 bit
1636 612 16 bit
1637 613 16 bit
1638 614 16 bit
1639 615 16 bit
1640 616 16 bit
The parameter sets the allocation of the rL signal to the physical output OUT1...OUT10, corresponding to the parameters out.1...out.10.
Several rL signals can be allocated to the same physical output using the OR and AND logical operators. The allocation is identified by an
index.
out.2 is only available with GPC-E1 present. In the three-phase configuration the status of the physical output OUT1 is copied.
out.3 is only available with GPC-E2 present. In the three-phase configuration the status of the physical output OUT1 is copied.
Options:
Increasing the +32 index inverts the output status for relay or static/Triac type outputs.
GPC-OP
Acronym
menu
06.04.01 out.1 Global
out.2
06.04.02 Global
06.04.03 out.3 Global
out.5
06.04.04 Global
06.04.05 out.6 Global
06.04.06 out.7 Global
06.04.07 out.8 Global
06.04.08 out.9 Global
06.04.09 out.10 Global
Index
0 Output disabled
1 Output rL.1 GPC-M
2 Output rL.1 GPC-E1
3 Output rL.1 GPC-E2
Output rL.2 GPC-M
5
6 Output rL.2 GPC-E1
7 Output rL.2 GPC-E2
9 Output rL.3 OR rL.5 GPC-M
10 Output rL.3 OR rL.5 GPC-E1
11 Output rL.3 OR rL.5 GPC-E2
13 Output rL.4 AND rL.6 GPC-M
14 Output rL.4 AND rL.6 GPC-E1
15 Output rL.4 AND rL.6 GPC-E2
17 Output (rL.3 OR rL.5) GPC-M...GPC-E2
18 Output (rL.4 AND rL.6) GPC-M...GPC-E2
31 Custom output (for out.9 and out.10 only)
81901 "MSW_GPC-40/600A"_03-2021_ENG_page 88
GF_eXpress menu
Description
MainMenu → Global → Outputs →
Out1...Out10 → out.1
MainMenu → Global → Outputs →
Out1...Out10 → out.2
MainMenu → Global → Outputs →
Out1...Out10 → out.3
MainMenu → Global → Outputs →
Out1...Out10 → out.5
MainMenu → Global → Outputs →
Out1...Out10 → out.6
MainMenu → Global → Outputs →
Out1...Out10 → out.7
MainMenu → Global → Outputs →
Out1...Out10 → out.8
MainMenu → Global → Outputs →
Out1...Out10 → out.9
MainMenu → Global → Outputs →
Out1...Out10 → out.10
Allocation
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
1
2
3
5
6
7
9
31
31