Rn - Er - Di1 - Di2 Led Function - gefran GPC Configuration And Programming Manual

3.35.15.

RN - ER - DI1 - DI2 LED function

Address
Format
Single- Multi-
node node
1221 197 16 bit
1643 619 16 bit
1644 620 16 bit
1645 621 16 bit
This parameter sets the function associated with the RN (Ld.St), ER (Ld.2), DI1 (Ld.3) and DI2 (Ld.4) LEDs, according to the address used.
The function is identified by an index.
Options:
By increasing the index by +16 the LED flashes if active (except index 8).
GPC-OP
Acronym
menu
06.08.01 Ld.St Global
06.08.02 Ld.2 Global
06.08.03 Ld.3 Global
06.08.04 Ld.4 Global
Index
0 RUN
1 MAN/AUTO controller
6 INDIG1 digital input configuration
7 Serial dialogue 1
8 OUT 2 GPC-M status
11 INDIG2 digital input configuration
12 Error status
13 Serial dialogue 2
14 INDIG3 digital input configuration
15 INDIG4 digital input configuration
81901 "MSW_GPC-40/600A"_03-2021_ENG_page 130
GF_eXpress menu
Description
MainMenu → Global → Leds → Ld.St
MainMenu → Global → Leds → Ld.2
MainMenu → Global → Leds → Ld.3
MainMenu → Global → Leds → Ld.4
Function associated with the LED
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
16
12
15
11