E2 Energy Consumption Meter Reset; 3.12. Digital Inputs - gefran GPC Configuration And Programming Manual

3.11.10.

E2 energy consumption meter reset

Address
Format
Single- Multi-
node node
1139
2163 115 bit
4211
The parameter sets the reset function of the E2 energy meter.
OFF = Function is disabled
Options:
ON = The function is enabled. The meter Ld.E2 is reset to zero.

3.12. Digital inputs

The following functions are related to the digital inputs:
• Automatic / manual control (see paragraph "3.22. Auto-
matic - manual control").
• Alarm memory reset (see paragraph "3.13.13. Alarm
memory reset").
• Software shutdown / startup (see paragraph "3.25.
Software shutdown").
• Reference Feedback calibration (see paragraph
"3.31.9. Feedback reference calibration").
• HB alarm calibration (see diagrams "Functional dia-
gram of HB calibration in ZC - BF - HSC mode" on
page 61, "Functional diagram of HB calibration in
PA mode" on page 61, "Functional diagram of HB
calibration for infrared lamps" on page 62).
For further explanations on the use and configuration of the
digital inputs, see paragraphs:
• "4.2. Using a function associated with the digital input
and via serial",
• "4.3. Using digital input 1 to enable software startup",
particularly the examples chapter.
The following functional diagram shows the signal process-
ing sequences of the digital inputs.
GPC-OP
Acronym
menu
M
BIT_
RESET_
E1
LDE2
E2
81901A "MSW_GPC-40/600A"_03-2021_ENG_page 37
GF_eXpress menu
Description
MainMenu → M → Expert →
Bit → BIT_RESET_LDE2_1
MainMenu → E1 → Expert →
Bit → BIT_RESET_LDE2_2
MainMenu → E2 → Expert →
Bit → BIT_RESET_LDE2_3
R/W OFF