O1 - O2 - O3 Led Function; Status (Status_W); Alarm Status Reading - gefran GPC Configuration And Programming Manual

3.35.16.

O1 - O2 - O3 LED function

Address
Format
Single- Multi-
node node
1646 622 16 bit
1647 623 16 bit
1648 624 16 bit
1649 625 16 bit
This parameter sets the function associated with the O1 (Ld.5), O2 (Ld.6), O3 (Ld.7) and BUTTON (Ld.8) LEDs, according to the address
used. The function is identified by an index.
Options:
By increasing the index by +16, the LED flashes if active.
3.35.17.

Status (STATUS_W)

For STATUS_W, see paragraph "3.22.3. Status (STATUS_W)".
3.35.18.

Alarm status reading

To read the status of
ALSTATE_IRQ
GPC-OP
Acronym
menu
06.08.05 Ld.5 Global
06.08.06 Ld.6 Global
06.08.07 Ld.7 Global
06.08.08 Ld.8 Global
Index
0
1
2
3
4
5
6
7
8
9
10
12
13
14
15
alarms, see paragraph "3.13.14. Alarm status (ALSTATE_IRQ)".
81901A "MSW_GPC-40/600A"_03-2021_ENG_page 131
GF_eXpress menu
Description
MainMenu → Global → Leds → Ld.5
MainMenu → Global → Leds → Ld.6
MainMenu → Global → Leds → Ld.7
MainMenu → Global → Leds → Ld.8
Function associated with the LED
Disabled
Repetition of status OUT 1
Repetition of status OUT 2
Repetition of status OUT 3
Key status
Repetition of status OUT 5
Repetition of status OUT 6
Repetition of status OUT 7
Repetition of status OUT 8
Repetition of status OUT 9
Repetition of status OUT 10
Serial dialogue 1
Serial dialogue 2
INDIG3 digital input configuration
INDIG4 digital input configuration
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
Unsigned
■
R/W
Short
1
2
3
4