Analog Input Upper Scale Limit; Analog Input Offset; Analog Input Low-Pass Filter - gefran GPC Configuration And Programming Manual

3.7.4.

Analog input upper scale limit

Address
Format
Single- Multi-
node node
1599 575 16 bit
1863 839 16 bit
1870 846 16 bit
The parameter sets the upper limit of the measuring scale used for analog input A1 or A2 or A3.
For examples of the use of the parameter, see paragraph "4.1. Setting parameters LS.A1/LS.A2/LS.A3 and HS.A1/HS.A2/HS.A3".
min...max: LS.Ax...200.0
3.7.5.

Analog input offset

Address
Format
Single- Multi-
node node
1601 577 16 bit
1865 841 16 bit
1872 848 16 bit
The parameter sets the offset applied to the value read from analog input A1 or A2 or A3 to match the expected value. It is used to correct
a possible constant probe reading error.
This offset applies linearly to all readings, so it cannot be used to correct for probe linearity errors.
min...max: -99.9...99.9
3.7.6.

Analog input low-pass filter

Address
Format
Single- Multi-
node node
1600 576 16 bit
1864 840 16 bit
1871 847 16 bit
The parameter sets the time constant value of the digital low-pass filter applied to analog input A1 or A2 or A3. The filter calculates the
average of the values read in the specified time interval. With 0.0 no filter is applied.
0.0...20.0
min...max:
GPC-OP
Acronym
menu
04.05.03 HS.A1 Global
HS.A2
04.06.03 Global
04.07.03 HS.A3 Global
GPC-OP
Acronym
menu
04.05.04 oFS.A1 Global
04.06.04 oFS.A2 Global
04.07.04 oFS.A3 Global
GPC-OP
Acronym
menu
FLt.A1 Global
04.05.05
04.06.05 FLt.A2 Global
FLt.A3 Global
04.07.05
81901 "MSW_GPC-40/600A"_03-2021_ENG_page 20
GF_eXpress menu
Description
MainMenu → Global → Inputs →
Analog input 1 → HS.A1
MainMenu → Global → Inputs →
Analog input 2 → HS.A2
MainMenu → Global → Inputs →
Analog input 3 → HS.A3
GF_eXpress menu
Description
MainMenu → Global → Inputs →
Analog input 1 → oFS.A1
MainMenu → Global → Inputs →
Analog input 2 → oFS.A2
MainMenu → Global → Inputs →
Analog input 3 → oFS.A3
GF_eXpress menu
Description
MainMenu → Global → Inputs →
Analog input 1 → FLt.A1
MainMenu → Global → Inputs →
Analog input 2 → FLt.A2
MainMenu → Global → Inputs →
Analog input 3 → FLt.A3
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#)
Float
■
R/W sec.
(####.#)
Float
■
R/W sec.
(####.#)
Float
■
R/W sec.
(####.#)
100.0
100.0
100.0
0.0
0.0
0.0
0.1
0.1
0.1