Lower Analog Output Scale Limit; Upper Analog Output Scale Limit; Serial Line Value For Analog Output - gefran GPC Configuration And Programming Manual

3.20.3.

Lower analog output scale limit

Address
Format
Single- Multi-
node node
1895 871 16 bit
1896 872 16 bit
1897 873 16 bit
The parameter sets the lower scale limit of analog outputs 1, 2 and 3, depending on the address used. The type of limit and the unit of
measurement are determined by the reference selected with parameter rF.AO1, rF.AO2 or rF.AO3.
min...max: 0.0...6553.5
3.20.4.

Upper analog output scale limit

Address
Format
Single- Multi-
node node
1898 874 16 bit
1899 875 16 bit
1900 876 16 bit
The parameter sets the upper scale limit of analog outputs 1, 2 and 3, depending on the address used. The type of limit and the unit of
measurement are determined by the reference selected with parameter rF.AO1, rF.AO2 or rF.AO3.
The range of permissible values is limited at the lower end by the setting of parameter LS.AO1, LS.AO2 or LS.AO3, depending on the
address chosen.
min...max: LS.AO1...6553.5 (analog output 1)
LS.AO2...6553.5 (analog output 2)
LS.AO3...6553.5 (analog output 3)
3.20.5.

Serial line value for analog output

Address
Format
Single- Multi-
node node
1751 727 16 bit
1752 728 16 bit
1753 729 16 bit
The parameter sets the serial line value for analog outputs 1, 2 and 3, depending on the address used. The limits for analog outputs 1, 2
and 3 are defined by parameters LS.AO1 and HS.AO1, LS.AO1 and HS.AO1 and LS.AO1 and HS.AO1 respectively.
min...max: LS.AO1...HS.AO1 (analog output 1)
LS.AO2...HS.AO2 (analog output 2)
LS.AO3...HS.AO3 (analog output 3)
GPC-OP
Acronym
menu
06.05.03 LS.A01 Global
06.06.03 LS.A02 Global
06.07.03 LS.A03 Global
GPC-OP
Acronym
menu
06.05.04 HS.A01 Global
06.06.04 HS.A02 Global
06.06.07 HS.A03 Global
GPC-OP
Acronym
menu
SERIAL_
10.01.23 Global
OUTA1
SERIAL_
10.01.24 Global
OUTA2
SERIAL_
10.01.25 Global
OUTA3
81901 "MSW_GPC-40/600A"_03-2021_ENG_page 96
GF_eXpress menu
Description
MainMenu → Global →
Outputs → Analog output1 → LS.AO1
MainMenu → Global →
Outputs → Analog output2 → LS.AO2
MainMenu → Global →
Outputs → Analog output3 → LS.AO3
GF_eXpress menu
Description
MainMenu → Global →
Outputs → Analog output1 → HS.AO1
MainMenu → Global →
Outputs → Analog output2 → HS.AO2
MainMenu → Global →
Outputs → Analog output3 → HS.AO3
GF_eXpress menu
Description
MainMenu → Global → Expert →
Virtual → SERIAL_OUTA1
MainMenu → Global → Expert →
Virtual → SERIAL_OUTA2
MainMenu → Global → Expert →
Virtual → SERIAL_OUTA3
Float
■
R/W s.p.
(####.#)
Float
■
R/W s.p.
(####.#
Float
■
R/W s.p.
(####.#
Float
■
R/W s.p.
(####.#
Float
■
R/W s.p.
(####.#
Float
■
R/W s.p.
(####.#
Float
R/W s.p.
(####.#
Float
R/W s.p.
(####.#
Float
R/W s.p.
(####.#
0.0
0.0
0.0
100.0
100.0
100.0
0.0
0.0
0.0